AP673H

Marca Huawei eKitEngine
Serie iGuard
Part Number 50089373

AP673H(11be indoor,2+2+4 tri-band,smart antenna,USB)

Cotizar por WhatsApp

Podés sumar varios productos y pedir una sola cotización por todo: ver mi cotización.

Cotización sin cargo y sin compromiso. Te responde el equipo comercial de Optima Ingeniería S.A.

Especificaciones

Especificaciones técnicas (42)

Estándar Wi-Fi	Wi-Fi 7
Distancia de señal óptima (m)	30m
Usuarios recomendados	300
Velocidad del equipo	13.66Gbps
Tipo de instalación	Wall,Ceiling (Solid Wall/Gypsum Board/Spring Tee/Flat-Edge T-Rail/Channel Rail/Beam/Threaded Rod),Junction Box (86 mm/1-Gang 120 mm/Octagonal/2-Gang 120 mm)
Dimensiones sin embalaje (Al x An x Pr) [mm(in.)]	59.5 mm x 220 mm x 220 mm (2.34 in. x 8.66 in. x 8.66 in.)
Dimensiones con embalaje (Al x An x Pr) [mm(in.)]	110 mm x 286 mm x 274 mm (4.33 in. x 11.26 in. x 10.79 in.)
Peso sin embalaje [kg(lb)]	1.54 kg (3.40 lb)
Peso con embalaje [kg(lb)]	2.18 kg (4.81 lb)
CPU	4-core, 1.0 GHz
Memoria RAM	DDR4 1 GB
Modo de alimentación	PoE,DC power adapter
Almacenamiento	NAND Flash 512 MB
Tensión nominal de entrada [V]	DC: 48 V PoE: 802.3bt/at
Rango de tensión de entrada [V]	DC: 43.2 V to 57.6 V PoE: 802.3bt/at
Protección contra sobretensión (puertos)	PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B
Tipo de ventiladores	None
Máx. puertos físicos del equipo	10GE optical (SFP+) x 1, GE/2.5GE/10GE auto-sensing 2.5GE (RJ45) x 1, 100M/1000M/2.5GE auto-sensing GE (RJ45) x 1, 10M/100M/1000M auto-sensing
Temperatura de operación [°C(°F)]	–10°C to +50°C (14°F to 122°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Temperatura de almacenamiento [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Humedad relativa de operación [RH]	5% RH to 95% RH, non-condensing
Altitud de operación [m(ft.)]	–60 m to +5000 m (–196.85 ft to +16404.20 ft)
Presión atmosférica [kPa]	53kPa - 106kPa ETSI 300 019-2-3
Puesta a tierra	Floating ground
USB	Supplies power of 2.5 W or 5 W.
Cantidad de radios	3
Flujos espaciales MIMO	Triple-radio mode: Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz-H): 2x2 (high frequency band) Radio 2 (5 GHz-L): 4x4 (low frequency band) Triple-radio mode (default): Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 2x2 Radio 2 (6 GHz): 4x4 Dual-radio mode: Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 4x4
Interfaz de radio	Built-in dynamic-zoom smart antennas, which can work in two modes on a per-packet basis through algorithm control: 170-degree omnidirectional coverage mode and 60-degree anti-interference mode
Ganancia de antena	2.4 GHz: 4 dBi/chain (peak gain) 1 dBi (combined gain) 5 GHz: 5 dBi/chain (peak gain) 2 dBi (combined gain) 6 GHz: 5 dBi/chain (peak gain) 2 dBi (combined gain)
Potencia máxima de transmisión	Triple-radio mode: 2.4 GHz: 20 dBm/chain 5 GHz: 19 dBm/chain 6 GHz: 19 dBm/chain Dual-radio mode: 2.4 GHz: 20 dBm/chain 5 GHz: 20 dBm/chain
Coexistencia celular avanzada (ACC)	Supported
MTBF [año]	114.3
MTTR [hora]	2
Consumo máximo [W]	24.8 W (excluding USB)
Disipación térmica máxima [BTU/hour]	80.39
802.3bt descripción de alimentación	At the power supply level of 802.3bt Class 8, no function is restricted. At the power supply level of 802.3bt Class 6, no function is restricted.
802.3at descripción de alimentación	When the power supply mode is negotiated to 802.3at and the USB port is idle, the device functions are not restricted. When the USB port uses 2.5 W power supply, the GE electrical port is unavailable and only one of the 2.5GE electrical port and 10GE optical port is available at the same time. In addition, the radio mode can only be set to 2.4 GHz (2x2) + 5 GHz (2x2) + 6 GHz (2x2), 2.4 GHz (2x2) + 5 GHz-H (2x2) + 5 GHz-L (2x2), or 2.4 GHz (2x2) + 5 GHz (4x4). In triple-radio mode, the maximum bandwidth values supported for the 2.4 GHz, 5 GHz, and 6 GHz radios are 40 MHz, 80 MHz, and 160 MHz, and the combined power of each radio is 20 dBm. In dual-radio mode, the maximum bandwidth of the 2.4 GHz radio is 40 MHz (combined power: 20 dBm), and that of the 5 GHz radio is 80 MHz (combined power: 23 dBm). When the USB port uses 5 W power supply, the GE electrical port is unavailable and only one of the 2.5GE electrical port and 10GE optical port is available at the same time. In addition, the radio mode can only be set to 2.4 GHz (2x2) + 5 GHz (2x2), 2.4 GHz (2x2) + 5 GHz-H (2x2), or 2.4 GHz (2x2) + 5 GHz (4x4), with the maximum bandwidth of 20 MHz supported for the 2.4 GHz radio and 80 MHz supported for the 5 GHz-H/5 GHz radio. In 2.4 GHz (2x2) + 5 GHz (4x4) mode, the combined power of the 2.4 GHz radio is 20 dBm and that of the 5 GHz radio is 23 dBm. Note: When the 5 W USB output is enabled, the third radio is disabled in triple-radio mode. As such, you are advised to set the radio mode to dual-radio or triple-radio (2.4 GHz + 5 GHz + 6 GHz) mode to ensure that the 5 GHz radio can use full-band channels.
Alimentación DC	No function is limited.
Banda de frecuencia	2.4GHz,5GHz,6GHz
Estabilidad de frecuencia [ppm]	+/-20
Ancho de canal máximo [MHz]	Triple-radio 6G mode: Radio 0 (2.4 GHz): 40 MHz Radio 1 (5 GHz): 80 MHz Radio 2 (6 GHz): 320 MHz Triple-radio dual-5G mode: Radio 0 (2.4 GHz): 40 MHz Radio 1 (5 GHz-H): 80 MHz Radio 2 (5 GHz-L): 160 MHz Double-radio mode: Radio 0 (2.4 GHz): 40 MHz Radio 1 (5 GHz): 160 MHz
Ambiente de almacenamiento	ETSI EN 300 019-1-1 Class 1.2 Note: - The product has a valid storage period of one year. - The valid storage period refers to the period during which the product maintains the required quality when stored with packing materials in an environment that meets the preceding requirements.

Información básica (1)

Versión de software inicial	V600R025C01

Información técnica provista por el fabricante, sujeta a cambios sin previo aviso. Imágenes ilustrativas. Ver ficha y documentación en Huawei eKit